Circuit Breaker-NC100LE

APPLICATION:
JD158LE-100 series leakage circuit breaker is suitable for AC 50/60Hz, rated voltage up to 230V/400V, rate

APPLICATION:
JD158LE-100 series leakage circuit breaker is suitable for AC 50/60Hz, rated voltage up to 230V/400V, rated current 100A and below, used to protect person against indirect contact, and protect circuitry and equipment against overload or short-circuit. It also can be used to switch the circuitry or start the motor infrequently under normal condition.The products comply with GB14048.2-2001&IEC60947-2:1997MAIN TECHNICAL PARAMETERSBreak time of rated residual current operation

No.			le(A)	I?nm A	Max break time(S) and min-driving time(S)
					I?n	2 I?n	3 I?n	4 I?n
General type			6380	equal or greater than 30	0.1	0.06	0.04	0.04	Max break time
TimeDelaytype	UltimateNon-driving time	0.06s0.1s		greater than 30	0.4	0.2	0.15	0.15
					0.13	0.06	0.05	0.04	Min non-driving time
			100		0.6	0.4	0.3	0.2	Max break time
					0.23	0.1	0.06	0.05	Min non-driving time

For I?n?30m A general type residual current operating circuit breaker,0.25A can be applied to replace 5I?n, 0.5A can be applied to replace 10I?n.

Over-current protection characteristics.

Rated Current(A)	Initialstate	Testcurrent	Specified time		Prospectiveresult	Remark
			le=63A	le is greater than 63A
63A]80A100A	Cold state	1.05le	t is equal or greater than 1h	t is equal or greater than 2h	Non-trip
	Proceed Following The previousTest item	1.30le	t is less than 1h	t is less than 2h	Trip	The current rises to the specified value steadilyWithin 5s
	Cold state	8le	t is equal or greater than 0.2s		Non-trip	Put through the powerSupply through closing the auxiliaryswitch
	Cold state	12le	t is less than 0.2s		Trip	Put through the powerSupply through closing the auxiliaryswitch